#Yn 622 n supersync manual#
Regarding the trial puff in manual mode: I read somewhere that this is a feature of the Nikon flashes. I ordered YN568 in China there and test it. In manual mode, it works correctly through synchronizers. But on my iTTL it doesn’t work, it’s overexposure, it won’t do it, although when working on camera everything is fine. In the absence of a flash like sb900 I can not check.
The shutter speed can be set up to 1/8000, and the dark band can be removed by adjusting the puff time in the synchronizer settings.Īlso, my opinion, which I wrote down a little higher: if the iTTL flash, but does not support it in the slave flash mode, then iTTL does not work through synchronizers. Buy Yongnuo YN-622N-TX i-TTL Wireless Flash Controller for Nikon featuring Compatible with Nikon i-TTL, Frequency: 2.4 GHz, Range: 328, TTL, Manual. I tested it on my simple flash Nissin Di466 with Nikond7000 camera. Look for me on Youtube | Facebook | Instagram | Twitter | Telegram.Īs I understand it, the SS mode - if the camera supports FP, but the flash is not, then you can still set shutter speeds shorter than 250. Yongnuo Digital YN-622N-TX is an excellent flash sync device for Nikon, fully compatible with Yongnuo YN-622N transceiver. The cheapest is to buy Yongnuo synchronizers on aliexpress. Personally, I really liked the YN-622N-TX in conjunction with the YN-622N :) It was a little surprising that when working with a manual power level, the flash gives a test pulse, most likely this is due to the fact that the flash installed on the YN-622N is in TTL mode. LCD menu control Focal length(zoom)of the A/B/C three groups of flash can be adjusted separately Grouping flash mode: I-TTL/Manual flash/Super sync Shutter.
Yongnuo YN622N-TX also adds a USB port for firmware updates, which is major advantage over the current triggers. When working in automatic modes, everything works very well, it is a pity, I did not have the opportunity to check the YN-622N-TX when working with several groups of flashes, as this requires another receiver of the YN-622N type. Yongnuo YN-622N-TX transmitter acts as a master control unit for the very popular YN622N I-TTL and Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. Also, unlike the YN-622N, the YN-622N-TX does not have a hot shoe for installing another flash on it. STrue, for this you need the flash itself, installed on the YN-622N transceiver, to switch to manual mode. When I installed the YN-622N-TX on a Canon camera, I was able to set the Nikon external flash on fire. Yongnuo Digital YN-622N-TX i-TTL Wireless Flash Controller
0 kommentar(er)
